Besides wheel blasting, Rösler also offers  air blast systems

Blast cabinets are ideal when a variety of small parts is to be treated. The cabins can be equipped with turntables, rotary baskets, blast nozzles, pressure blasting systems, oscillators and other special auxiliary equipment, making them very versatile. The full-width front-opening door provides clear access to the complete blast chamber, and the special design prevents blast media spillage when opened. Pressure and injector blasting cabins are used for: cleaning, deburring, surface finishing, decorative blasting. The range of shot blast media that can be used covers all non-hygroscopic media from very abrasive materials (e.g. aluminium oxide or silicon carbide) to plastic media and corn cob. Brochures Download  Blasting Cabinets

SA 1400 Rotary Indexing Satellite Table Machines With the Rösler SA 1400 rotary indexing table machine, gentle finishing of different kinds of components with no part-on-part contact is possible. The entire spectrum of blasting applications ranges from delicate deburring to shot peening. The installation is particularly interesting for applications in which the entire surface of the components need not be blasted, but only specific sections. The SA 1400 is a modular system and it can be equipped with 6, 8, 10 or 12 satellites,  operating completely automatically.  The machines can be equipped with either injection or pressure blasting systems.

RBD-Inj Continuous Rubber Conveyor Belt Machines (injection blasting) The  core component is a highly wear-resistant, perforated and fabric reinforced transport belt, made from rubber. In a continuous process, the components are treated by a total of 24 injection nozzles altogether, which are fixed on an adjustable support frame. Due to the vertical lifting movement of the frame and the free adjustment of the nozzles, all-round blasting of parts with complex geometric shapes is possible. All commercial blast media can be used.

SBI Loop Belt Machines (injection blasting) This type of Rösler continuous flow shot blasting machine is ideally suited for treating small, high volume bulk components. The special design of the V-shaped loop belt creates a screw-like movement of the parts through the machine, which ensures  homogenous treatment of all parts. SBI shot blasting machines have been designed for applications where the required blast media does not permit the use of turbines. These machines are suited for applications such as cleaning iron or steel castings, roughening aluminium springs or shot-peening of thermoset products.

RMBC Inj Tumble Belt Batch Machines (injection blasting) The Injection System Tumble Belt Batch Machine is equipped with a pressure system including several nozzles. Multiple nozzles decrease the processing time. It is ideal for processing very complex, small components with very aggressive shot-blasting media (e.g. corundum).

RWT Turn Table Burs from grinding the surfaces of synchronous rings can efficiently and completely be removed using RWT shot blasting machines. The swing table with two satellites accepts interchangeable holders for differently sized rings.  The swing table keeps the time required for parts handling to a minimum. Automated handling can be integrated with this system.